Shoei Finishing Pvt.Ltd.

Forging/Billet Heating Furnace :

Output capacity range:	100 kg/hr. to 9000 kg/hr.
Uniformity/Temp. accuracy	±5 degC.
Temp. range	As per product
Quench delay	15 to 20 sec
Door sealing	Self-weight /cylinder operated
Skin temp	Ambient +25 degC

Product Details:

• For pre heating of billets and ingots forging furnaces are used
• The temperature maintained inside these furnaces is around 550 to 900 °c
• An open fireplace system is used through which most of the heat is transmitted via radiation.
• The Furnace operate around 16 to 18 hours a day, capacity can be vary from 250 Kg to 10 Ton per batch.
• The Operational time cycle in forging furnace is divided into Heat up Time, Soaking Time and Forging Time.
• The Consumption of fuel depends upon type of feed and number of reheat required.

Conveyor (chain/belt) type Furnace :

Output capacity range:	100 kg/hr. to 9000 kg/hr.
Uniformity/Temp. accuracy	±5 degC.
Type of conveyors	Forged chain/honeycomb belt etc.
Door sealing	Self-weight /cylinder operated
Skin temp	Ambient +25 degC

Conveyor used in these type of furnaces usually honeycomb belt/forged chains etc. to transfer the load in indexing based cycle operations.

Bell Type Furnace :

A batch-operated heat-treatment furnace in which products are heated under a movable dome. It is used for heat treatment of sheet and light-section rolled products in a controlled gaseous medium. Bell furnaces are classified according to use (treatment of coils of narrow strip, sheets, rods, and so on).

o Bell Annealing is a type of annealing that derives its name from the shape of the furnace used during the process.
o Bell Annealing Heats Batches of metal which are placed on a base assembly, enclosed in inner cover, and covering by furnace body.
o When the furnace is suspended from the crane it looks like Bell.
o The base assembly is the source of convection and the main method of heat transfer to charge.

Attractive Features:

• Excellent Temperature Uniformity
• Consistent product quality
• Good production rates
• Low operating costs
• Efficient use of furnace asset by cooling with inner cover
• Saving in shop Floor space requiring less capital investment and reducing material handling

Anode Cathode Oven :

Uniformity/Temp. accuracy	±5 degC.
Temp. range	Ref.
Type of material	Battery cell
Door sealing	Self-weight /cylinder operated
Skin temp	Ambient +25 degC

Such ovens were used in battery production industries for cell binding process.

• For pre heating of billets and ingots forging furnaces are used
• The temperature maintained inside these furnaces is around 550 to 900 °c
• An open fireplace system is used through which most of the heat is transmitted via radiation.
• The Furnace operate around 16 to 18 hours a day, capacity can be vary from 250 Kg to 10 Ton per batch.
• The Operational time cycle in forging furnace is divided into Heat up Time, Soaking Time and Forging Time.
• The Consumption of fuel depends upon type of feed and number of reheat required.

Baking type oven :

Output capacity range:	100 kg/hr. to 9000 kg/hr.
Uniformity/Temp. accuracy	±5 degC.
Temp. range	Ref.
Type of material	Battery cell
Door sealing	Self-weight /cylinder operated
Skin temp	Ambient +25 degC